Collaborative Research

  • R&D
  • Collaborative Research

Empowering Industries with Advanced Solutions

Project 01

LFP Electrolyte
Development

Development challenges of electrolytes for LFP cathode material
  • Low electrical conductivity of LFP → Nano carbon coating required
  • LFP with particle sizes of several μm → specific surface area and side reactions ↑
  • Diffusion of Fe2+ ions from the surface of LFP particles to electrolytes
Optimal Electrolyte Solution for LFP Cathode
  • Low electrical conductivity of LFP → Nano carbon coating required
  • LFP with particle sizes of several μm → specific surface area and side reactions ↑
  • Diffusion of Fe2+ ions from the surface of LFP particles to electrolytes
Project 02

Development
for LMFP Battery
Solution

Development challenges of electrolytes for LMFP cathode material
  • Low electrical conductivity of LMFP → Nano carbon coating required
  • LMFP with particle size of several μm → specific surface area and side reactions ↑
  • Diffusion of Fe2+, Mn2+ from LMFP particle surface to electrolyte
Optimal Electrolyte Solution for LMFP Cathode
  • Increased electrolyte compatibility for LMFP + amorphous nanocarbons
  • Decreased LMFP particle surface electrolyte oxidation decomposition and gas emission
  • Increased coating stability for inhibiting Fe2+ and Mn2+ ion diffusion
Project 03

High Voltage
Fast Charge
for LCO Battery

Challenges with LCO High Voltage/Fast Charging
  • 4.3V or higher voltage causes electrochemical oxidation decomposition which then leads to electrolyte loss
  • Lack of stable surface coating, resulting in poor life cycle
  • Heat generation due to high current density during fast charging: electrolyte decomposition -> safety issues
Solution for LCO High Voltage/Fast Charging
  • By forming an effective surface coating at high voltage, side reactions are suppressed and the cathode structure deformation is minimized
  • Determine optimal electrolyte composition or optimal additives by considering main factors of fast charging performance such as viscosity and interfacial properties
Project 04

High-capacity
Cathode
Material
Electrolyte
solution
Development
for High-Ni
Battery

Challenges with High Ni, High Capacity Cathodes
  • Side reactions due to microcracks inside cathode particles during charging
  • Gas generation due to residual lithium → decreased stability
  • Electrolyte depletion due to side reaction between transition metal and electrolyte, thick SEI layer formation
Solution for High Ni, High Capacity Cathodes
  • Inhibition of electrolyte decomposition by forming CEI layer
  • Improving the stability of the cathode interface through the use of functional additives
Project 05

Electrolyte
Solution
Development
for Silicon-based
Anode

Challenges with Silicon-based Anodes
  • Particles broken by repeated rapid expansion/contraction during charging/discharging
  • Deintercalation from electrodes due to expansion/contraction, shortening life cycle
  • Life cycle plunges due to side reactions between silicon surface and electrolyte
Solution for Silicon-based Anodes
  • Suppressing volume expansion/contraction of silicon by forming an effective SEI on the anode surface
  • Improving compatibility with silicon surface (coating) and electrolyte
Project 06

Flame-retardant
Electrolyte
Development
Project

Challenges with Current Electrolytes
  • Increased number of EV fire cases and increased concern for EV safety due to increased EV demand
  • Difficult to extinguish fire in case of fire
Solution for Flame-Retardant Electrolyte
  • Development of flame retardant properties of electrolyte through flame retardant additive
  • Ensure flame retardancy and battery performance through additives in the functional groups of -P and -F
Project 07

Electrolyte
Development
for Li-Metal
Anode

Challenges for Li-metal Anodes
  • Battery stability issues due to anode dendrite growth during charging
  • Capacity reduction due to lithium and electrolyte depletion
  • Battery characteristics deteriorated due to accumulation of residual lithium and SEI film
Solution for Li-Metal Anodes
  • Protection of Li-metal surface by forming Li-metal surface SEI film
  • Improving battery life cycle with funtional lithium salt (LiFSA) and functional additive (FEC)